Serving metro Atlanta since 1999
Hydro Jetting for Drain and Sewer Lines
Cabling punches a hole through a clog. Hydro jetting scours the pipe wall with high-pressure water so the line runs at full diameter again, which is why it is the right tool for grease, scale, and root intrusion.
- ✓Licensed & insured
- ✓24/7 emergency response
- ✓Upfront flat-rate pricing
Licensed since
1999
- Since
- 1999
- Availability
- 24 / 7
- Counties served
- 7 metro
- Call us
- (404) 380-7641
Know the signs
When hydro jetting is the right call
If any of these sound familiar, the problem is usually cheaper to fix now than after it spreads.
A line that clogs again within weeks or months
Grease-heavy kitchen and restaurant drains
Root intrusion at sewer line joints
Scale buildup inside older cast iron
Slow drainage across multiple fixtures
Preventive maintenance for commercial kitchens
How we work
How a hydro jet service works
- 1
Camera inspection first
We look at the line before jetting to confirm the pipe can take it and to identify breaks, bellies, or offsets that jetting will not solve.
- 2
Jet the line
A high-pressure hose with a specialized nozzle is fed through the line, cutting the blockage and washing debris downstream.
- 3
Verify with the camera
A second pass confirms the pipe wall is clean and shows you exactly what condition the line is in.
The details
Hydro jetting versus cabling
Cabling is faster and cheaper for a single blockage and is often the right choice. Jetting costs more but restores the full pipe diameter, which is what actually stops the cycle of repeat clogs.
Jetting is not appropriate for every pipe. Badly deteriorated cast iron or a collapsed section needs repair, not pressure, and the camera inspection is how we tell.
Why grease lines need jetting, not cabling
Grease coats the pipe wall and hardens. A cable bores a channel through it, water flows again for a while, and the remaining layer catches the next thing that comes down the line. Jetting removes the layer.
That is why restaurants on a jetting schedule have far fewer emergency shutdowns than those calling for a cable each time.
Roots and older Atlanta sewer lines
Clay and cast iron sewer lines in older neighborhoods draw roots into every joint. Jetting clears them, and camera footage shows whether the joint itself needs a spot repair.
Left alone, roots widen the joint until the line fails and the yard has to be opened.
Questions
Frequently asked questions
Is hydro jetting safe for my pipes?+
For sound pipe, yes. We camera inspect first because severely deteriorated lines need repair instead.
How often should a commercial kitchen be jetted?+
Many kitchens do well on a quarterly or semiannual schedule, depending on volume.
Does jetting remove tree roots?+
Yes, root-cutting nozzles clear roots, though a recurring intrusion also needs the joint repaired.
Is jetting worth the extra cost over cabling?+
When clogs keep returning, yes. For a one-off blockage, cabling is usually enough.
Coverage
Hydro Jetting by service area
Clayton, DeKalb, Gwinnett, Fulton, Cobb, Douglas, and Cherokee counties. Open your city for local details, ZIP codes, and response times.
Related searches
What people search before they call us
Need a plumber near you?
Call (404) 380-7641 or send the details and photos of the issue. We are available 24/7, and insurance claims are welcome on restoration work.